Active Video Twisted Pair Transmission, Three position range switch for gain select on transmitter.

Passive Balun allows use of 18 gauge cabling with Analog cameras,  BNC Male/Screw Terminal.

Passive Balun allows use of Cat 5 cabling with Analog cameras,  RJ45 Female/BNC Male.

Passive Video Balun kit allows for the transmission of video over UTP cable for up to 1,000 feet, Kit contains 1 piece of IV-TTP111VL (has five inch cable) and 1 piece of IV-TTP111VT.

This passive balun can be used to transmit video, data and power over a single UTP cable, Terminal block connection to transmit video up to 1,000 feet for color and 2,000 feet for black and white.

Passive video balun that allows for the transmission of video and power over UTP cable for distances up to 1,000 feet, Kit contains 1 piece of IV-TTP111VPJ (DVR side) 1 piece of IV-TTP111VP (camera side), RJ45 Female/BNC Male.

Video & Power Transceiver Professional KIT ( TTP111VP-T + TTP111VPJ-T) - To send video & power via one CAT5 UTP cable

4 port passive transceiver,  Allows four cameras to transmit video over a single Cat 5 cable,  One Female RJ45, Four Female BNC ports.

Transmits a full motion color video signal up to 1,000 feet - Provides a highly balanced mode of video transmission - Passive, no power required - Eliminates long coaxial cable runs - Miniature size ideal for use with housings - Works with UTP or can be used with two wire power cable (18/21 AWG depending upon distance)

4 Channel Video Transceiver,  One CAT5 cable to send 4 video signal to instead of coaxial cable,  Perfect for 4 cameras to Hub CCTV Distribution Application.

16 Port Passive Video Transceiver Hub,  Identical same as TPP016, but using RJ45 connector instead of terminal block,  16 BNC connector for video output, 4 x RJ45 connector for 16 channel video input.

Coaxial Video Ground Loop Isolator, Prevents video-signal distortion caused by video ground loops.

Same functions as GL001 plus built in Video Balun for extra interference rejection.

Programmable 8 in 16 out Video Distributor, LED display and 4 buttons for setting, each operation, Each video input (8) could set up 1-16 CH video output

8 video input to 16 video output, Blue LED: video signal on/off detection at each channel, Built in out-of-band noise filter, Dual Power: DC12V /AC24V

Power Distributor Box, Individually protected PTC*-type output fuse rated 1.1Amps@250VAC, Individual status LED indicators, Surge protected outputs, Supports up to 1-30VAC/VDC

Power Converter, AC to DC12V Power Converter with DC plug cable 500mA Max, Output Power: DC12V regulated, Step down AC24V for use with DC 12V cameras and devices, Allows for longer distance power transmission than native 12V power

Power Converter, AC to DC12V Power Converter with DC plug cable 1000mA Max, Input power: AC18~26V; DC18~28V, Output Power: DC12V regulated, For 12V DC camera and devices requiring long distance 24V power transmission

Coaxial Video Surge Protector BNC Connector, Two stage protection: under 1ns-90V, over 10ns-12V, Maximum Surge Current: 4KV, Surge Life: 300 surges of 100Amps

IV-TGP001 Passive Video Balun with built in Ground Loop Isolation circuitry. RJ45 connection, Transmission distance of 1,000+ feet.

DVR Alarm cards, 4 Digital Input Channels, 4 Relay Output Channels, Input 3.3V~5V

CAT5 VGA Extender, Active type, including transmitter and receiver, Built in contrast, brightness adjustment at Receiver, Use 4 pairs UTP CAT5 cable instead of VGA cable for long rang transmission

16 Port Active Receiver Hub In 1U Rack Mounting Panel. Built in a highly balanced mode of video transmission for extra interference immunity. Built in transient protection and ground lifting

16 Port Passive Receiver Hub In 1U Rack Mounting Panel. Built in a highly balanced mode of video transmission for extra interference immunity. Built in transient protection and ground lifting

Repeater from RS485 data signal to RS485 up to 1200 meters, Plug in screw terminal block for easy wiring, Power input from DC jack