Specification |
IV-CP2200APR |
Interface |
RS-232 |
AC Input Capacity on Battery |
2200VA |
AC Input Frequency |
50 or 60 Hz +/- 10% (auto sensing) |
AC Input Voltage |
(+/-) 25% at line input |
AC Output Frequency |
50 or 60 Hz +/- 0.5% |
AC Output Transfer |
2/4 milliseconds, including detection time |
AC Output Voltage Regulation |
AVR automatically increase output voltage 15% above input voltage if -9% to – 25% of nominal. |
AVR decrease output voltage 13% below input voltage if +9% to +25% of
nominal |
Protection 10 BaseT |
Network (UTP, RJ-45) compatible jacks |
Protection EMI/RFI |
10dB at 0.15 MHz, 50 dB at 30 MHz |
Protection Inside Protection |
UPS output cut off immediately or input circuit breaker protection |
Protection Overload |
UPS automatic shutdown if overload exceeds 110% nominal at 60 sec and
130% at 3 sec |
Protection Short Protection |
UPS output cut off immediately or input fuse protection |
Protection Spike |
320 Joules, 2ms |
Protection Unit |
Fuse for overload & short circuit protection |
Battery DC Voltage |
12V |
Battery Protection |
Automatic self-test & discharge protection, replace battery indicator |
Battery Run Time |
70 – 80 minutes |
Battery Type |
Sealed, maintenance-free lead acid |
Battery Typical |
8 hours (to 90% of full capacity) |
Indicator |
LED |
Alarm Battery Backup |
Slow beeping sound (about 0.47 Hz) |
Alarm Battery Low |
Rapid beeping sound (about 1.82Hz) |
Alarm Overload |
Continue beeping sound |
Environment Ambient |
3,500 meters max. elevation, 0-95% humidity non-condensing, 32°F~112°F |
Environment Audible |
<40dBA (1 meter from surface) |
Environment Storage Condition |
15,000 meters max. elevation |
Weight |
35.2 lbs. |
Warranty |
1-Year Limited Warranty |
Reviews
There are no reviews yet.